01-11 | Industry
These two little acronyms get mixed up a lot in the electronics manufacturing service world. On paper, they only vary by a single letter, but in practice, there’s a lot more separating SMTs and SMDs. Chiefly, one is a process and the other is a devi
01-11 | Industry
Wave soldering is a bulk soldering process used in the manufacture of printed circuit boards. The circuit board is passed over a pan of molten solder in which a pump produces an upwelling of solder that looks like a standing wave.
01-11 | Industry
Dip soldering is a small-scale soldering process by which electronic components are soldered to a printed circuit board (PCB) to form an electronic assembly. The solder wets to the exposed metallic areas of the board (those not protected with solder m
01-11 | Industry
PCB test jigs are customized devices used to test a PCB. A test jig facilitates the probe of defined test points to help determine the expected inputs and outputs of the PCB.
01-11 | Industry
BGA's full name is Ball Grid Array, which is an array of solder balls on the bottom of the package substrate as the I/O end of the circuit and the printed circuit board (PCB). The device packaged with this technology is a surface mount device.
01-11 | Industry
The circuit board is generally made of epoxy or other composite materials. It’s used to physically support the components, as well as electrically connect them to form a live circuit.
01-11 | Industry
There are some points that make SMT different from Through Hole, which have been briefly summarized below: SMT has helped significantly in solving the space problems that were commonly noticed with the Through Hole mounting.
01-11 | Industry
On the technical side, flex-cracking refers to excessive bending of the PCB under a ceramic chip capacitor. The ceramic chip capacitor cannot withstand excessive stress due to its brittle nature.
01-11 | Industry
DIP soldering & Dip welding, is a small welding process through which electronic components are welded to printed circuit boards (PCBS) to form an electronic component.
01-11 | Industry
Dip soldering is accomplished by immersing the components to be joined in a molten solder bath. Therefore, all parts are coated with a filler metal. Solder has low surface tension and high wetting ability. There are many types of solders,
01-11 | Industry
Our customers are over the world, it means that we need to delivery PCBAs by air or sea transport. During the transportation, we have to pay attention to the packing details in order to avoide any accidents.
01-11 | Industry
Kingsheng PCBA, we provide quality solution to customer’s PCB Assembly. Our factory is a rich experienced PCB Assembly manufacturer. We have ISO certification, and engineer will be responsible to check the incoming materials, and have QA to check th