03-07 | Industry
Electrolytic capacitors can be either wet-electrolyte or solid polymer and are commonly made of tantalum or aluminum, although other materials may also be used. Supercapacitors are a special subtype of electrolytic capacitors, also called ...
03-07 | Industry
The process of PCBA patch maintenance involves the following steps: 1. Check PCBA; 2. Power test; 3. Measure all power; 4. Repair according to the bad phenomenon; 5. Self-check after repair; 6. Test tool test; 7. Conduct a comprehensive inspection ...
03-05 | Industry
As electronic products become smaller, the components used in them are also getting tinier, which means that the processing environment for surface mount technology (SMT) chips must also be highly controlled. This has led to a need for stricter ...
03-04 | Industry
In addition, as a PCBA and SMT production factory, we must share our technician evaluation criteria with all interested customers. Our SMT technicians undergo a 100% assessment, and only those who pass the certification evaluation are deemed qualified
02-29 | Industry
which PCBA processing cost is higher? To answer this question, we need to break down the entire PCBA processing process, which involves two main parts: circuit board production and component assembly (including SMT surface mount and DIP plug-in weldin
02-27 | Industry
The reliability of BGA Electronic packaging technology needs to be evaluated before applying it to the complete model. This evaluation should be based on the environmental characteristics of the application and the reliability requirements of the...
02-20 | Industry
DIP vs SMT is part of the PCBA processing. However, not all PCBA factories have dip vs SMT post-welding capabilities, and the processing quality is also uneven. When choosing a PCBA factory for cooperation, it is recommended to go to the factory
02-19 | Industry
SMT patch stands for a series of technological processes based on PCB (Printed Circuit Board). SMT, or Surface Mount Technology, is the most popular technology and process in the electronics assembly industry.
01-30 | Industry
Currently, the PCBA test methods for PCB assembly circuit boards in the industry can be roughly divided into three parts: AOI, ICT/MDA, and FVT/FCT. In addition, some people use X-ray full-line inspection, but it is not common.
01-23 | Industry
The PCBA processing industry is highly valued by major enterprises as it is the most important core component of electronic products. With new electronic products and technologies being updated iteratively and quickly, the quality, delivery time
01-12 | Industry
Surface mount technology, also known as SMT, is classified into two categories: no leads and short leads. It is a technique for assembling circuits that uses dip or reflow soldering to join components.
01-10 | Industry
In general, circuit boards can be soldered at temperatures between 180 and 220 °C. A temperature that is too high may result in excessive solder joint melting and component damage; a temperature that is too low may generate poor-quality solder joints
We would also like to thank our customers for their trust and support. The company's outstanding achievements are mainly due to the loyalty of our customers, which also encourages and spurs our company to forge ahead.
