11-20 | Industry
PCBs intended for extreme environments often have a conformal coating, which is applied by dipping or spraying after the components have been soldered. The coat prevents corrosion and leakage currents or shorting due to condensation.
11-20 | Industry
KingshengPCBs are plated with solder, tin, or gold over nickel and a resist for etching away the unneeded underlying copper. After PCBs are etched and then rinsed with water, the solder mask is applied, and then any exposed copper is coated with solde
11-20 | Industry
In the PCB reverse technology research, the anti-push schematic diagram is based on the Printed Circuit Board file diagram or directly based on the product directly depicts the PCB circuit diagram, designed to explain the principle and work of the
11-20 | Industry
MCPCB, Metal Core PCB, thermal PCB - whichever name you prefer, they are all PCBA boards which use a base metal material as the heat spreader portion of the KingshengPCBA circuit board.
11-20 | Industry
Kingsheng PCBA design Wave soldering has been the standard large-scale industrial method for such electronic PCB assembly. The name comes from the waves of solder required to glue the component to the circuit PCBA board.
11-20 | Industry
Where components are to be placed, the printed circuit board normally has flat, usually tin-lead, silver, or gold platedcopper pads without holes, called solder pads. Solder paste, a sticky mixture of flux and tiny solder particles,
11-20 | Industry
Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards (PCBs). An electronic device so made is called a surface-mount device (SMD)
11-20 | Industry
Due to the small dimensions of SMDs, Kingsheng PCBA Regards that SMT inductors are limited to values of less than about 10 mH. Smaller inductance with moderately high current ratings are usually of the ferrite bead type.
11-20 | Industry
Design for manufacturability (DFM) means more than looking for and correcting design violations that will cause production failures. Designers from kingshengPCBA must strive for high yields during board fabrication and assembly,
11-20 | Industry
How can a company expect to apply advanced PCB technologies and still meet productivity and time-to-market goals? Part of the answer is to ensure that the tools they are using have kept up with the challenges of these advanced technologies.
11-20 | Industry
If a PCBA companies going to produce board designs on right time, advanced PCB and IC technologies have to be matched with advanced design and analysis tools are must . in a recent survey :Why PCB Design Matters to the Executive ,
11-20 | Industry
Kingsheng PCBA provides the full suit of Electronic Manufacturing service in one stop excelling in small, medium and large volume production run as to save customer's cost and reduce customer's time to the market.
We would also like to thank our customers for their trust and support. The company's outstanding achievements are mainly due to the loyalty of our customers, which also encourages and spurs our company to forge ahead.
